laser mast base
Home >Special Equipment > Laser Mast Base contact us
hinged down
Designed by John Pugh of Balfour Beatty Rail, this simple but effective device eliminates the need for dozer drivers to climb onto the blade to affix the laser equipment.. in situ features

Releasing two bolts from the rear of the Laser Mast Base allows the laser mast to hinge down for the safe and speedy fitment of the laser receivers.

The clever bit of John's design is the way that the hinge tightens on its pin as the mast is raised so that vibration and slack are eliminated.

The Thomson Laser Mast Base is available in any colour to match your machine.

specifications   downloads

specs

specs 2
Please contact our technical department for full information
   
   
lifting benefits finished
Copyright: Thomson Engineering Design Ltd all rights reserved. Specifications may change without notice.