Cable Handling Yoke

contact us
drum shaft in yoke
The Thomson Cable Handling Yoke is the most efficient way to lift cable drums and to lay cable using an excavator crane. complete device Features

By simply withdrawing two retaining pins the drum shaft is released from the yoke.

Fit the drum shaft to the cable drum, pick the shaft up with the yoke and reset the retaining pins and the device is ready for laying cable.

The Thomson Cable Handling Yoke can be fitted with a hydraulic rotator to help angle the drum for accurate cable laying and an optional control arm with cable thimble can also be supplied for cable guidance.

Standard model has a payload capacity of 3,000kg but the device can be supplied in any required size and capacity.

* Extremely Robust

* Quick and Simple to Use

* All Steel Welded Construction

* High Resistance to Dynamic Loads

* Can be Built to Suit any Drum Size

* Std. Model for 2.5m Diam. x 1.5m

* Handle Drums and Lay Cables 



CONFIGURATIONS

TYPES

DOWNLOADS

Standard: 2.5m Diam. x 1.5m Drum

SWL: 3,000kg or 5,000kg

Can be supplied to suit any drum size and weight to order - please contact technical@thomsondesignuk.com for further details

Shackle Attachment

Hydraulic Rotator

Fixed Quick-Hitch Head

Who Who uses the Cable Yoke?
Brochure page
Operators Instructions
Certificate of Conformity
roller support Benefits shackle attachment

* Minimises Handling Time

* Maximises Productivity

* High Reliability

* Custom Specifications Available

Copyright: Thomson Engineering Design Ltd all rights reserved. Specifications may change without notice.