Crossing Slab Lifter

contact us
crossing lifter
The Thomson Crossing Slab Lifter is designed for the rapid removal and replacement of rubber block level crossings. fitted to excavator features

When lifting crossing slabs out of the track, the forks hydraulically clamp the slab against the under side of the frame to provide a reliable grip without damage to the crossing slab.

This allows the machine operator to stack blocks on edge ready for replacement.

When re-fitting crossings the slabs can be pressed into place using two specially fitted blade edges.

One machine operator and two men to release the tie rods can remove a complete two lane crossing in around 35 minutes.

 

specifications Pads N0. 094/012065 downloads

specs

specs 2
Brochure page
Product Acceptance
Movie Clip
with blades benefits new
Copyright: Thomson Engineering Design Ltd all rights reserved. Specifications may change without notice.