Switch and Crossing beam
Home >Panel Handling >S + C Beam contact us
switch and crossing beams
Handling switch and crossing panels presents a number of challenges as the panel must be prevented from felxing significantly during the lift. lifting a pane features

This problem may be overcome by using a long, rigid beam to carry the panel but it can take a long time to chain and balance the panel on chains.

The Thomson Engineering Design S & C Lifting beams overcome this by providing pre arranged fixed lifting points to which the beam chains can be instantly attached.

Adjustable to fit anywhere on the S & C panel and lifting below the foot of the rail these beams are pre fitted to the panels at the panel assembly site.

Great time savings on site are easily achieved using this product.

specifications   downloads


specs 2
Who Who operates this attachment?


Please contact our technical department for full information
fitting the beam benefits beam fitted
Copyright: Thomson Engineering Design Ltd all rights reserved. Specifications may change without notice.