Designed by John Pugh of Balfour Beatty Rail, this simple but effective device eliminates the need for dozer drivers to climb onto the blade to affix the laser equipment..

Releasing two bolts from the rear of the Laser Mast Base allows the laser mast to hinge down for the safe and speedy fitment of the laser receivers.

The clever bit of John’s design is the way that the hinge tightens on its pin as the mast is raised so that vibration and slack are eliminated.

The Thomson Laser Mast Base is available in any colour to match your machine.

Benefits
  • Install laser equipment without working at height
  • Simple to use
  • Robust and rigid
Specifications
  • Weight :- 15 kg
  • Tilt angle :- 90 deg
  • Safety Pin :- 12mm
  • Fixing bolt :- M16
  • Spanner size :- 24mm
  • Standard finish :- 08E51 Yellow

Paint to match machine finish optional

Features

  • Completely rigid when fixed
  • High strength and toughness
  • Eliminates working at height Safety pin and bolt fixing
  • Does not affect laser operation
  • CE Marked

A SIMPLE WAY TO IMPROVE SITE SAFETY.